Matrix 4x4 (RS232 EDID) SK-MT4K44W

Product Detail

Shenzhen Yomband Electronics Co.,Ltd is one of the top level China matrix 4x4 (rs232 edid) sk-mt4k44w manufacturers and suppliers equipped with professional matrix 4x4 (rs232 edid) sk-mt4k44w factory, we are always at your service.

Matrix 4x4 (RS232 EDID) SK-MT4K44W

SUN KING (HONG KONG) LIMITED 

USER MANUAL 

MODEL NO.: SK-MT4414A

HDMI Matrix 4 x 4,4K*2K, 1.4Version,1080p






Enjoy the Vivid World!

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. 

I. Introduction

The 4x4 DVI/HDMI matrix support output resolution up to 4Kx2K. It allows any source (Blue-Ray player, HD DVD player, satellite receiver, game system, etc.) to be shown on any of four displays simultaneously, no matter the source is HDCP encryption or not. Extra infrared receiver port is supplied for remote control. This matrix offers solutions for digital entertainment center, HDTV retail and show site, HDTV, STB, DVD and projector factory, data center control, information distribution, conference room presentation, school and corporate training environments, etc.

II. Features

1. Supports display resolutions up to 4K x 2K@30Hz,1080P@120Hz,and 1080P 3D@60Hz

2. 3D HDMI 1.4a video format support.

3. 3D video support including Frame Packing for all 3D formats up to a 297MHz TMDS clock.

4. Supports deep color up to 48-bit per pixel.

5. HDCP 1.4 support (INPUT), HDCP v1.4a protocol compliant (OUTPUT).

6. Supports reception of any audio data conforming to the HDMI specification 1.4 such ad L-PCM at up to 192kHz,compressed audio(IEC 61937),DSD,DST,DTS and HBR.

7. Full colorimetry including sYCC601, Adobe RGB, Adobe YCC601, xvYCC extended gamut color.

8. Operates for TMDS clock frequencies up to 300MHz.

III. Package

HDMI Matrix -------------------------------------------------------------------------- 1PCS

12V2.5A DC Power Supply adapter ------------------------------------------------------ 1PCS

Operation Manual --------------------------------------------------------------------- 1PCS

Remote Controller----------------------------------------------------------------------1PCS

IV. Specifications

1. Frequency Bandwidth            2.97Gbps

2. Input Ports4 x HDMI Female input ports

3. Output Ports4 x HDMI Female output ports

4. Power SupplyDC 12V, 2.5A

5. ESD Protection Human Body Model:± 8kV (air-gap discharge)

± 4kV (contact discharge)

6. Dimensions (mm) 113(W) X 260 (D) X 26 (H)

7. Weight(g)      750

8. Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F

9. Storage Temperature-20°C ~ 60°C / -4°F ~ 140°F

10. Relative Humidity20 ~ 90% RH (Non-condensing)

11. Power Consumption (Max) 20W

V. Operation Controls and Functions

Front Panel



1. ON/OFF: Power on/off switch.

2. POWER: This red LED illuminates when the device is connected with power supply.

3. IR IN: Remote control signal receive.

4. OUTPUT A: Press this button to select the input source to HDMI OUTPUT A, and these red LED illuminate when the output select to the corresponding input.

5. OUTPUT B: Press this button to select the input source to HDMI OUTPUT B, and these red LED illuminate when the output select to the corresponding input.

6. OUTPUT C: Press this button to select the input source to HDMI OUTPUT C, and these red LED illuminate when the output select to the corresponding input.

7. OUTPUT D: Press this button to select the input source to HDMI OUTPUT D, and these red LED illuminate when the output select to the corresponding input.

Rear Panel




1. INPUT PORTS: LED1-4 illuminate when the HDMI signal plug in INPUT 1-4 port. 

INPUT 1-4 ports are where you connect the HDMI source.

2. OUTPUT PORTS: LED A-D illuminate when the TV plug in OUTPUT A-D ports.

 OUTPUT A-D ports are where you connect the HDTV or monitor with HDMI cable

3. RS232: This port can control the matrix via PC.

4. DC 12V: Plug the 12V DC power supply into the unit and connect the adaptor to AC wall outlet.

Right Panel



1. EDID Selector: Select HDMI output signal format via EDID Selector.

   Nomber	EDID Selector	Description
   1	0000	Auto mode(default)
   2	0001	1080I,Stereo Audio 2.0
   3	0010	1080I,Dolby/DTS 5.1
   4	0011	1080I,HD Audio 7.1
   5	0100	1080P,Stereo Audio 2.0
   6	0101	1080P,Dolby/DTS 5.1
   7	0110	1080P,HD Audio 7.1
   8	0111	3D,Stereo Audio 2.0
   9	1000	3D,Dolby/DTS 5.1
   10	1001	3D,HD Audio 7.1
   11	1010	4K2K,Stereo Audio 2.0
   12	1011	4K2K,Dolby/DTS 5.1
   13	1100	4K2K,HD Audio 7.1
   14	1101	1024x768 DVI
   15	1110	1920x1080 DVI
   16	1111	PC Software control mode

VI. Application Example



VII. Remote control



OUT A: Press 1\2\3\4 button will to select input source to HDMI OUT A, and the LED will indicate the corresponding input source. 

OUT B: Press 1\2\3\4 button to select input source to HDMI OUT B, and the LED will indicate the corresponding input source. 

OUT C: Press 1\2\3\4 button to select input source to HDMI OUT C, and the LED will indicate the corresponding input source. 

OUT D: Press 1\2\3\4 button to select input source to HDMI OUT D, and the LED will indicate the corresponding input source. 

VIII. PC controller user guide

Installation

Matrix controller is a green software. Just copy MatrixController.exe to PC which is used to control the Matrix by RS232 COM port or TCP/IP to complete installation.

Preparation

?Connect PC and Matrix by RS232 cable (headers of both sides of cable should be FEMALE) or TCP/IP(local area network)

?Power-up Matrix

?Double click MatirxController.exe icon to run it

How to control Matrix

?“General” page



1. Select RS232 COM or TCP mode

2.Select RS232 COM port

3.Click to connect or disconnect PC and Matrix

4.Select Matrix IP

5.Connect to Matrix IP

6.Search Matrix IP

7.Configure Matrix IP and MAC

8.Click to reset to the factory settings

9.Device information display area

10.Click to refresh device status: include device information displayed in 9 area and Input/Output Settings on “Matrix” page

11.Click to clear device information

12.Enable or disable Beep

?Configure TCP 

After action of 7, edit form will pop-up as below:



1.Select auto or static IP

2.Rewrite the Matrix IP

3.Rewrite the Matrix MAC

?“EDID control” page



The controller have 3 methods to set the EDID mode. Manual mode, Copy mode and open EDID file mode.

1. Select the needed EDID to input port and click set button the EDID will write to the selected HDMI input ports.

2.Copy the selected HDMI output or HDBT output EDID and click set button to write to the selected HDMI input ports.

3.Open the user define EDID file and click set button to write to the selected HDMI input ports. 

? “Matrix” page



1. LED which display Input number for respective Output

2.Click to select Input port for respective Output port

3.Click to select previous or next Input port for respective Output port

? “FW upgrade” page 



1.Click to open FW file(file extension is “.fw”)

2.Display the FW file path

3.Displaying the progress of the software upgrade

4.Click to upgrade the Matrix software

5.Display the message of the software upgrade

6.Clear the message of the software upgrade